Composition of pyrolyzate from Japanese green tea

Green tea is a beverage that is produced by hot-water extraction of the leaves of tea (Camellia sinensis L.). As the amount of green tea consumption has increased, the importance of using the residue has grown. To address this problem, chemical compositions of two pyrolyzates obtained with an electric kiln, L and G, which were obtained from the tea leaf product and its hot-water extraction residue, respectively, were examined. Both pyrolyzates were alkaline, in contrast to the acidic pHs that are typical of pyrolyzates from wood materials. The major constituents were nitrogen-containing compounds, which accounted for up to about 70% (based on gas chromatography-mass spectrometry peak area). Caffeine was the main compound in both samples, although it might not be a pyrolysis product but actually sublimates from the samples and then condenses back into the pyrolyzates. Other nitrogen-containing compounds were formed mainly from proteins and amino acids. Acids and phenols, which are typical components in pyrolyzates obtained from wood materials and contribute to acidic pH, were rare in both samples. Other neutral compounds are known as compounds in pyrolyzates from wood materials. The pyrolyzates obtained in this experiment were novel and may have new uses.Contents of this report was presented in the 52nd Annual Meeting of the Japan Wood Research Society, Gifu, 2002     

Genotypic effects on the variation of wood quality and growth traits in plantation forest made by cutting cultivars of Japanese cedar

We studied the effect of genotypes of planting stocks regarding the variation of the modulus of elasticity of tree trunks on standing trees (trunk-MOE), tree height (TH), and diameter at breast height (DBH) in a 19-year-old Japanese cedar plantation made with root cuttings. Trunk-MOE was assessed nondestructively using a tree-bending method. Genotypes of individual trees were detected using the random amplified polymorphic DNA (RAPD) technique. RAPD analysis revealed that the sampled plantation consisted of 14 genotypes. Genotypic effects on DBH and TH were unclear, and there was no significant difference among genotypes. This result indicated that an acquired variation should have more influence than an inherited variation on DBH and TH. For trunk-MOE, there were significant differences among the four largest genotypes at the 5% level. However the coefficient of variation in trunk-MOE of each genotype ranged from 7.5% to 26.8%. It seems reasonable to assume that the wide variation in trunk-MOE in a sampled plantation may depend on the environmental effect within a clone as well as on the genetic origin of clones. We therefore conclude that the use of multiple planting stocks from different cuttings for which the wood quality is unknown contributed strongly to the wide variation in trunk-MOE in the plantation of Japanese cedar.     

Assessing raindrop impact energy at the forest floor in a mature Japanese cypress plantation using continuous raindrop-sizing instruments

The raindrop size distribution of throughfall and open rainfall was monitored continuously during a rainfall event using laser raindrop-sizing instruments (LD gauges), in order to calculate the raindrop impact energy in a plantation of mature Japanese cypress (Chamaecyparis obtusa), where surface erosion at the forest floor had been a problem. Data from two rainfall events were analyzed. The LD gauges recorded qualitative raindrop size distribution, and the capture rate during each rainfall event was used to manipulate raindrop data quantitatively. Throughfall and open rainfall comparisons revealed several important differences. First, throughfall raindrops were fewer in number and larger in size than open rainfall drops. In one rainfall event, for example, throughfall raindrops were less than one-fifth as frequent as open rainfall raindrops; in addition, the maximum throughfall raindrop diameter was 6.35mm compared to 3.31mm for open rainfall raindrops. Second, throughfall raindrops that were larger than the largest open rainfall raindrops comprised 63.8% of the throughfall precipitation by volume. Third, total raindrop impact energy from throughfall was over twice that of open rainfall. Moreover, comparison of throughfall events implied that throughfall raindrops did not always have a uniform distribution between different events or among different periods of time in one rainfall event, in contrast to findings in previous studies which showed that throughfall raindrops had a uniform size distribution independent of rainfall intensity. It is possible that an abrupt transition of throughfall intensity from low to high changes the distribution of throughfall raindrops.     

Sorption of Cr(VI) on the wood of Japanese larch treated with concentrated sulfuric acid

A carbonaceous sorbent was prepared from the wood of Japanese larch (Larix leptolepis) by dehydration with concentrated sulfuric acid in a 69% yield. The abilities of the sorbent to remove Cr(VI) from aqueous solutions were investigated. Research parameters included the initial solution pH, temperature, and initial concentration of Cr(VI) in solution. The removal of Cr(VI) was highly solution pH dependent and was mainly governed by physicochemical sorption under weak acidic conditions. The equilibrium data fit well in the Langmuir isotherm model. The Langmuir constants were calculated at different temperatures, and the sorption capacity increased with rising temperature, indicating the endothermic nature of the Cr(VI) sorption onto the sorbent. The desorption experiments suggest that the Cr(VI) sorption is generally irreversible, owing to strong interaction of HCrO ₄ ⁻ with the active sites of the sorbent.     

Removal of trichloroethylene from aqueous solution by pyrolyzed Japanese cedar bark

The bark of Japanese cedar (Cryptomeria japonica D. Don) was heated in an N₂ atmosphere at 300–900C for 3h to investigate the surface properties of the pyrolyzed residuces and their ability to remove trichloroethylene (TCE) from aqueous solutions. The specific surface areas (S _N) and total pore volumes (V _N) of the pyrolyzed barks steadily increased with rising pyrolysis temperature; no significant differences in the average pore diameters (D _N) were observed at higher temperatures (600–900C). The adsorption capacities of the pyrolyzed residues for TCE were determined under batch mode conditions using an aqueous solution containing 500g TCE dm^–3. The adsorption data were well fitted to the Freundlich equation. The adsorption capacity of the bark pyrolyzed at 900C was about five times larger than that of commercial activated carbon.This study was presented at the 10th International Symposium on Wood and Pulping Chemistry, Yokohama, June 1999     

Criterion for estimating humidity control capacity of materials in a room

As a measure of estimating humidity control capacity of materials in an airtight room under sinusoidal temperature variation, we used the Cb value, which is the ratio of the range of variation in relative humidity in a steel box lined with the material of interest to the range in an empty steel box. In order to clarify the factors that affect the Cb value, we focused on both the temperature variation rate and the area that is lined in the box. It was found that changing the rate of temperature variation over one period strongly affected the Cb value, although the amplitude of temperature variation did not. We further noticed that the difference between the time when peak temperature was reached and the time when peak absolute humidity was reached (peak time difference), was found to be useful for estimating the humidity control capacity of materials. Knowing the difference between the phase when peak temperature was reached and the phase when peak absolute humidity was reached (phase angle difference) was also useful. Because the Cb value was affected by both the variation period and the lined area in the box, we can draw a contour diagram of the period and the lined area for materials to give an overview of the humidity control capacity of a material. The materials of primary interest in this study were Japanese cedar and porous ceramics.     

Allometric model of the Reineke equation for Japanese cypress (<Emphasis Type="Italic">Chamaecyparis obtusa</Emphasis>) and red pine (<Emphasis Type="Italic">Pinus densiflora</Emphasis>) stands

An allometric model that explains the mechanism of the difference in the slope of the Reineke equation (A) among species was proposed based on the allometric relationships of mean tree height (H) to quadratic mean diameter D (H ∝ D ^θ ) and stand density N (H ∝ N ^δ ), i.e., A = θ/δ. The proposed model was fitted to Japanese cypress (Chamaecyparis obtusa Endl.) and red pine (Pinus densiflora) stands. The allometric exponents θ and δ were, respectively, 0.8995 and −0.5000 for cypress and 0.8612 and −0.6619 for pine. The difference between cypress and pine was significant for δ but not for θ. Inserting the exponents into the model resulted in predicted slopes of −1.7991 for cypress and −1.3011 for pine. The difference in the slope of the Reineke equation between the two species was produced by characteristics related to the tree crown, rather than characteristics related to stem slenderness. The proposed model enables us to estimate the slope of the Reineke equation from commonly measured stand attributes, such as mean tree height and quadratic mean diameter. Therefore, the proposed model is expected to be practical and convenient for estimating the slope of the Reineke equation and for explaining the mechanism of its variation among species. The model should be also accepted as a generalized model of the stand density versus quadratic mean diameter relationship, whereas the original Reineke equation should be seen as a specific case of this model.     

Genetic improvement in pine wilt disease resistance inPinus thunbergii: The effectiveness of pre-screening with an artificial inoculation at the nursery

Open pollinated progenies from 15 clones of Japanese black pine (Pinus thunbergii), that had been selected for their tolerance to pine wilt disease, were tested by artificial inoculation with pine wood nematode for six years at a nursery of Kyushu Regional Breeding Office. Family variations in the respective year were all significant. An analysis of variance across the six years’ tests confirmed highly significant effect of year and of families; however, the year by family interaction was significant also. Phenotypic and genetic variances estimated from each year’s result were fitted to a quadratic regression using their mean survival ratio as an independent variable. The variances were greatest at around 0.5 of the mean survival ratio. Estimated heritability showed a similar trend of change, whereas the peak of the expected amount of improvement shifted toward the lower survival range: around 0.4, where a greater selection differential was anticipated. It was concluded that a useful amount of genetic improvement that may be reduced by 30% due to the interaction, would be expected by prescreening seedlings where the mean survival ratio after inoculation was around 0.25 to 0.6.     

日本落叶松在旺苍县引种栽培初步研究

通过对旺苍县盐井河采育场10多年来引种栽培日本落叶松的结果与旺苍县外其它地区的引种栽培试验结果和本地华山松的生长情况进行对比分析，证明引种是成功的，进一步探讨了日本落叶松在旺苍的引种效果和生态适应性，提出了旺苍自然地理分布的引种适生区，是旺苍北部中山区主要速生造林树种之一。     

Blackening of Diospyros genus xylem in connection with boron content

The amount of boron contained in the xylem of Japanese persimmon (Diospyros kaki Thunb.) and ebony (Diospyros ebenum Koen) was determined by inductively coupled plasma (ICP) emission spectrometry and a modified curcumin–acetic acid method. The boron content was compared between the heartwood and sapwood of ebony as well as between a blackened portion (“kurogaki”) and normal portion of Japanese persimmon. The kurogaki contained a higher level of boron than the normal portion of the same individual, although the boron content varied among individuals. Moreover, the boron content of the heartwood of ebony was much higher than that of the sapwood. These results suggest the participation of boron in the blackening of Japanese persimmon. Because both kurogaki and heartwood of ebony are durable to fungal attack, the blackening of Diospyros genus appears to be related to the formation of defensive substances in which boron seems to take part. The convenient curcumin–acetic acid method is an alternative to the ICP method with comparable accuracy.